Introduce

UV Lasers

  266nm Deep UV Lasers

  355nm UV Lasers

     355nm CW Lasers (1-10mW)

     355nm Pulsed Lasers (1-80mW)

     355nm Pulsed Lasers (100-500mW)

     355nm Pulsed Lasers (600-1000mW)

  375nm UV Lasers

Visible DPSS Lasers

Visible Diode collimated Lasers

Infrared DPSS Lasers

Infrared Diode collimated Lasers

Low Noise Lasers

Single Longitude Mode Lasers

Q-switched / Pulsed Lasers

RGB / RG Lasers

Fiber Lasers

Laser Pointers

Laser Collimator

Laser Scanner System

Laser Accessory

DPSS 355nm UV Laser
 
Specifications :
Model
 
SDL-355-XXXT
Wavelength (nm)
 
355nm
Output Power
 
1-10mW
Operating mode
 
CW
M2 factor
 
<2.0
Power stability after warm-up  
<1%, <3%, <5% (over 2/4/8 hours)
Transverse mode
 
Near TEM00
Warm-up time
 
<15 minutes
Beam Divergence (1/e2, Full Angle)
 
<1.5mrad
Dimensions of laser head (mm)
 
212 ¡Á 88 ¡Á74mm
Beam diameter at the aperture
<3mm
Spectral line width
<0.1nm
Polarization ratio
>50:1
Point stability after warm-up
<0.05mrad
Power supply (110 or 220VAC)
SDL-PS-500
Operating Temperature
10¡æ¡«35¡æ
Dimensions of power supply
238 ¡Á146 ¡Á94mm
Expected Operating Lifetime
> 10000 hours
Warranty time
1 year
Note:
See the Glossary and Technology for information about the terms used  
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.  
Other Sytles and custom designs are available. Contact us to discuss your needs.  

Home | Company Profile | Lasers | Optics | Crystals | Support | Contact
Copyright © 2002-2008 by Shanghai Dream Lasers Technology Co., Ltd.